Kenwood HM-DV6MD - Manual (Page 79)

79
MD Edit Functions
Application section
Erasing all tracks in disc
(ALL ERASE)
Select "all ERASE".
During stop, all tracks can be erased. Be careful in using this operation because the tracks cannot be recov-
ered once the entire minidisc has been erased.
1
÷ To cancel the operation in the middle, press the
TRACK EDIT key any time before step
2
.
1
Press the TRACK EDIT key.
2
Select "ERASE".
3
Set it.
4
Set it.
4 ¢
P.CALL
SET
TRACK EDIT
E R A S E
l E a R A S E l ?
Before starting MD editing, be sure to cancel the pro-
gram mode by pressing the PGM key in stop mode.
Select the "MD" input ⁄
Display after execution
"EDIT NOW"
= "COMPLETE"
(When editing is completed successfully)
"EDIT NOW"
= "CAN' T EDIT"
(When editing is impossible)
After editing, eject and remove the MD.
3
MD 0
Information is
being written. MD has been ejected.
÷ The MD editing is established finally at the moment the
MD disc is ejected.
R I W T I N G
J E E C T
Do not turn power off or apply shock or impact while
"WRITING" is displayed. If the power cord is un-
plugged before "WRITING" disappears, the recorded
or edited data will be lost.
Execute the track erasure operation.
2
ENTER
Each press of the
4 or ¢ keys switches the op-
eration.
1 "MOVE"
2 "COMBINE"
3 "ERASE"
Press in stop mode
SET
l E a R A S E l o k