Kenwood HM-DV6MD - Manual (Page 4)

4
Before applying power
Preparation section
Basic section
Application section
Knowledge sections
This unit is equipped with a demonstration func-
tion (only display). The demonstration consists
of sequential change of display and indicators
showing the operations, but the audio itself does
not change. The demonstration function can be
cancelled as follows.
÷ This operates automatically when a power failure has
occurred or the plug of the power cable has been
pulled while the power was ON.
In regard to demonstration
"DEMO ON" (To execute demonstration):
After turning power ON, press and hold the SET/
DEMO key (for more than 2 seconds).
"DEMO OFF" (To cancel demonstration):
Press the SET/DEMO key during demonstration.
FM indoor antenna (1)
Accessories
AM loop antenna (1)
Video cord (1)
Speaker cord (2)
Remote control unit (1)
SET/DEMO
Batteries (R6/AA) (2)
Unpacking
Unpack the unit carefully and make sure that all the accessories are present.
If any accessories are missing, or if the unit is damaged or fails to operate, notify your dealer immediately. If the unit was
shipped to you directly, notify your shipper immediately. Kenwood recommends that you retain the original carton and
packing materials in case you need to move or ship the unit in the future.
Keep this manual handy for future reference.
Please confirm that the following accessories are present.
AC plug adaptor (1)
Use to adapt the plug on the power cord
to the shape of the wall outlet.
(Accessory only for regions where use is
necessary.)