Kobe Range Hoods CH-100 CH0030SQB - Manual (Page 14)

12
OPERATION INSTRUCTIONS
This KOBE hood is equipped with four electronic controls with a 10-second standby startup &
30-second delay shutoff, powerful centrifugal squirrel cage with baffle filters, and bright 12-volt
20-watt halogen lights.
The four electronic controls are Light Control, Speed Control A, Speed Control B and the Power
Control (On/Off). Refer to Figure 18.
Figure 18
TURN ON:
•
Press Power Control (On/Off) button once.
(Note: If any Control button is not pressed within 10 seconds, power will be
automatically turned off).
•
The KOBE hood will start on Low speed. Each press of the Speed Control
button will cycle through the various speeds.
•
Press Speed Control A button to cycle from Low, Medium, High, or
QuietMode
™. Press Speed Control B button to cycle from Low, QuietMode™,
High or Medium.
(Note: Speed Control A or B will operate both fans. These two speed buttons will
allow you to change the speed quicker.)
•
Press Light Control button to turn halogen light on.
•
Press the back Red button to turn on heating lamp.
(Note: Heating lamps are sold separately. Heating lamps required 120-volt,
175-watt.)
TURN OFF:
•
Press Power Control (On/Off) button once, panel lights will flash and power
will be completely shut off after 30 seconds.
OR
•
Press Power Control (On/Off) button twice, all power will be shut off
immediately.
•
If only the lights are on, pressing Power Control (On/Off) button once will turn
power off after 30 seconds.
Speed Control A
Power Control
Speed Control B
Light Control