Network settings, Data settings, Erasing all contacts – Kyocera K322 User Manual
Page 48: Switching between phone lines, Setting com port speed, Setting the phone to receive data or faxes

42
Customizing Your Phone
2.
Enter your four-digit lock code.
3.
Select
Limit Calls
.
4.
Choose an option and press
:
–
No Limit
limits no calls.
–
Limit Outgoing
calls only. Incoming calls
can still be received and answered.
–
Limit All
calls, both incoming
and outgoing.
Erasing all contacts
You can erase all entries from your
Contacts directory.
1.
Select
Menu
→
Settings
→
Security
.
2.
Enter your four-digit lock code.
3.
Select
Erase Contacts
.
4.
Select
Yes
to erase all contacts. A message
appears: “Erase ALL Contacts?”
5.
Press
to
select
Yes
to erase all contacts.
Network settings
Switching between phone lines
Your phone can have two service accounts, or
phone lines, associated with it. Each phone line
has its own phone number.
When you are using one line, you cannot receive
calls from the other. It would be as if the phone
were “off” for that number. Your voicemail,
however, will still take messages. All contacts and
settings are shared for both lines.
Note:
You must first establish a second phone
line with your service provider. Once established,
a second phone number becomes available in the
menu for selection:
1.
Select
Menu
→
Settings
→
Network
→
Set Phone Line
.
2.
Select one of the two lines and press
.
Data Settings
Setting Com port speed
The Com Speed sets the data rate at which your
phone connects to a laptop or PC, or at which it
sends and receives over-the-air text messages.
1.
Select
Menu
→
Settings
→
Accessories
→
Com Port Speed
.
2.
Select the speed. The options are:
19.2 kbps
,
115.2 kbps
(default),
230.4 kbps
, and
Other
.
Note:
There may be a higher charge for
making calls using high-speed data in areas
where 1X service is available. Check with your
service provider for details.
Setting the phone to receive data
or faxes
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. You cannot receive voice calls while
the phone is in data/fax mode.
To receive data or faxes, you must connect the
phone to a laptop or PC and switch the phone
from voice mode to data/fax mode.
82-N8863-1EN.book Page 42 Wednesday, May 17, 2006 1:22 PM