Konica Minolta xg - Manual (Page 44)

44 RECORDING – ADVANCED OPERATION
Drive modes
Single-frame advance – to take a single image each time the shutter-release button
is pressed. This is the camera’s default setting.
Self-timer – to delay the release of the shutter (p. 46). Used for self-portraits.
Multi frame – to create a composite image of a nine-frame series when the shutter-
release button is pressed once (p. 47).
Continuous advance – to take multiple images when the shutter-release button is
pressed and held (p. 45).
The drive modes control the rate and methodof image
capture. Indicators indicating the selected drive mode
appear on the monitor. The drive mode is selected in section
1 of the recording-mode menu (p. 43). If auto reset (p. 55) is
active, the drive mode is reset to single-frame advance
when the camera is turned off.