Konica Minolta xg - Manual (Page 102)

102 DATA-TRANSFER MODE
Connecting to Windows 98 and 98SE
The driver needs only to be installed once. If the driver cannot be installed automatically, it can be
installed manually with the operating system’s add-new-hardware wizard; see the instructions on
the following page. During installation, if the operating system requests the Windows®98 CD-ROM,
insert it into the CD-ROM drive and follow the accompanying instructions on the screen. No special
driver software is required for other Windows operating systems.
Before connecting the camera to the
computer, place the DiMAGE Viewer CD-
ROM in the CD-ROM drive. The DiMAGE
installer menu should automatically
activate. To automatically install the
Windows®98 USB driver, click on the
“Starting up the USB device driver
installer” button. A window will appear to
confirm that the driver should be installed;
click “Yes” to continue.
Automatic Installation
When the driver has been successfully
installed, a window will appear. Click
“OK.” Restart the computer before
connecting the camera (p. 100).