Konica Minolta xg - Manual (Page 108)

108 DATA-TRANSFER MODE
Disconnecting the camera from a computer
Windows ® XP, 2000 Professional, and Me
To disconnect the camera, click once on the unplug-or-eject-hardware icon located
on the task bar. A small window will open indicating the device to be stopped.
When more than one external device is connected to the computer, repeat the procedure above
except right click on the unplug-or-eject-hardware icon. This will open the unplug-or-eject-hardware
window after clicking on the small window indicating the unplug-or-eject-hardware routine.
Click on the small window to stop the
device. The safe-to-remove-hardware
window will open. Click on “OK” to
close the window, turn the camera off,
and then disconnect the USB cable.
Never disconnect the camera when the access lamp is red – the data
or memory card may permanently be damaged.