Konica Minolta BIZHUB 210 - Manual (Page 81)

Before making copies 3
bizhub 162/210 3-35
Copying onto manually fed paper by manual bypass
1
Position the documents.
For details refer to “Loading the document” on page 4-10.
2
Adjust the paper guides to fit the size
of the paper.
3
Insert one sheet of paper with the
front side facing down, lightly sliding
the paper as much as possible into
the feed slot.
The manual bypass mark ( ) ap-
pears in the bottom line of the
screen.
? Is a card or a postcard loaded?
% Make sure that it is not curled (rolled).
4
Press the [No/C] key.
The paper source setup menu appears.
5
Press the [
*] and [)] keys to select
the type of paper loaded.
Select from the following four paper
type settings.
PLAIN
OHP
CARD
ENVELOPE
6
Press the [Yes] key.
The paper size menu appears.