Konica Minolta BIZHUB 210 - Manual (Page 116)

4 Making copies
4-12 bizhub 162/210
Positioning a sheet document on the original glass
Use the following procedure to position plain paper or an original that is not
suitable for use in the document feeder.
1
Raise the document feeder or origi-
nal cover.
2
Place the document face down on
the original glass.
3
Position the document on the scales
above and to the left of the original
glass.
4
Gently lower the document feeder or
original cover.
5
Specify the desired copy settings.
For details, refer to “Making a basic
copy” on page 4-3.
6
Press the [Start] key.
This will start the copy cycle.