Konica Minolta BIZHUB 210 - Manual (Page 204)

7 Using the utility mode
7-36 bizhub 162/210
Specifying ERASE SETTING
1
Select ERASE SETTING in the
COPY SETTING 1 menu.
For details refer to page 7-31.
2
Press the [
*] and [)] keys to select
either LEFT , UPPER or FRAME .
3
Press the [Yes] key.
4
Using the 10-key pad, enter the
width of the area to be erased. The
width of the area to be erased can be
set between 5 mm and 20 mm.
? Do you want to correct the erase
setting?
% Press the [No/C] key and enter the correct setting.
5
Press the [Yes] key.
The COPY SETTING 1 menu appears again.