beautypg.com

Kenwood DMF-5020 User Manual

Page 52

background image

DMF-5020/DMF-3020/MD-203 (En)

52

Action

Meaning

Displayed Message

NO DISC

UNLOCK

SCMS ON

NotAudio

DISC FULL

TITLE FULL

BLANK DISC

NO TRACKS

READING

WRITING

DISC ERROR

EDIT NOW!

CAN’T EDIT

ok? (blinking)

PROTECTED

PLAY ONLY

Displayed messages and actions to be taken against them

÷ Load a disc.

÷ The digital cord or optical fiber cable is not

locked in position or connected incompletely (or
not connected).

0

÷ Use analog recording.

÷ Use analog recording.

÷ Use another recordable disc.

÷ More than 255 tracks cannot be recorded per

disc.

÷ Refer to ”Total number of title characters”.

t

÷ When playback is required, use a recorded disc.

÷ The disc can be used for recording without any

problem.

÷ This is a normal operation.

÷ This is a normal operation.

÷ Erase all tracks by executing ”_+ALL”. If this is

not possible, use another Mini Disc.

e

÷ This is a normal operation.

÷ Perform editing following the restrictions.

÷ Press the ENTER key to execute editing.

÷ Release the “WRITE PROTECT” condition.

8

÷ Load a recordable Mini Disc.

÷ This unit is not loaded with disc.

÷ The digital cord or optical fiber cable is not

locked in position or connected incompletely (or
not connected).

÷ An attempt is made to record digital signal from

a source while its digital copy has been prohib-
ited by SCMS.

÷ The digital signal being input is not an audio

signal.

÷ There is no recordable area on the disc.

÷ An attempt is made to record a 256th track.

÷ An attempt is made to assign a title with more

characters than usable.

÷ The disc does not contain any recordings.

÷ The disc does not contain any tracks but has a

disc title.

÷ The TOC

*1

data of the disc is being read.

÷ The data related to editing or recording is being

written in the disc.

÷ The contents of UTOC

*2

are abnormal.

÷ The editing operation is in progress.

÷ An attempt is made to perform editing beyond

the restrictions, for example to erase a track
which is too short.

÷ This is a message for confirming if editing can

really be executed.

÷ The Mini Disc is in the “WRITE PROTECT”

condition.

÷ A playback-only Mini Disc is loaded.

In case of difficulty

This manual is related to the following products: