Kenwood DMF-5020 - Manual (Page 10)

DMF-5020/DMF3020/MD-203 (En)
10
SL 16 XS-8
SYSTEM CONTROL
ƒ
REC IN
R
L
R
L
PLAY OUT
(VARIABLE) PLAY
OUT
OPT. COAX.
REC
IN
2 COAX. 1 OPT.
LINE SYSTEM
CONTROL
DIGITAL
REC
IN
2 COAX. 1 OPT.
DIGITAL
PLAY
OUT
OPT. COAX.
REC
IN
2 COAX. 1 OPT.
DIGITAL
- + - + R
REC PLAY
MD
SL 16 XS-8
SYSTEM CONTROL
ƒ
L
R
OPTICAL
DIGITAL
OUTPUT
System connections
Make connection as shown below. When connecting
the related system components, refer also to the in-
struction manuals of the related components.
Caution: Do not plug in the power lead until all connec-
tions are completed.
1. Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging
connection cords without removal of the power cord can cause malfunctions or damage to the unit.
Malfunction of microprocessor
If operation is not possible or erroneous display ap-
pears even though all connections have been made
properly, reset the microprocessor referring to “In
case of difficulty”.
Q
÷ When connecting the audio cords (cords with pin plugs on each end), insert
the white plugs into the L (Left) jacks and red plugs into the R (Right) jacks.
÷ If the system components are equipped with more than one system control
cord connectors, any one of the connectors can be used.
DIGITAL input / output jacks
(OPTICAL)
Remove protective caps
from digital input/output
jacks before use.
Remove cap.
System control cord
(CD player optional)
CD player
MD recorder
Audio cords × 2
(accessories)
Optical fiber cable
(optional)
Optical fiber cable
×
1
(accessories)
System control cord × 1
(accessories)
TO WALL AC
OUTLET
Integrated amplifier
Notes Notes
÷ Be careful not to lose the protective caps.