Kyocera FS-C5100DN - Manual (Page 31)

Quick Print
Color Mode
This icon changes between color and black & white printing. If desired, check
EcoPrint to make text and graphics appear lighter in the printed job.
EcoPrint does not increase print speed.
Collate
This icon changes the ordering of the printed pages. The page ordering
sequence can either be 123, 123, 123, or 111, 222, 333, and so on.
Print on both sides
This icon changes between duplex printing for flipping on the long edge,
duplex printing for flipping on the short edge, or for not using duplex printing.
Multiple pages per sheet
This icon changes between Off, 2, and 4 for the number of pages printed on
one sheet. For more than 4 pages per sheet, define these settings in
Layout
>
Multiple pages per sheet.
Any basic print options can be
Reset to the default values in the Quick Print
tab. This button only appears when it is accessed from an application’s
Print
dialog box.
The following sections describe some of the
Quick Print tab options in more
detail.
Color mode can also be found in the Basic and Imaging tabs, Collate
and
Duplex printing in the Basic tab and Multiple pages per sheet in the
Layout tab. The Profiles options is accessed from Printing Preferences.
Color Mode
Color mode lets you choose full-color printing (CMYK) or printing with black
toner only. When the selection appears in color, all color settings in the driver
are enabled. Color cannot be chosen if
Black & White is selected in the Device
Settings > Administrator Settings > Black & White mode.
Collation
Collate specifies the order in which the pages of a multiple copy job are printed.
With
Collate selected, the first time the print job is sent to the printing system
the data is rendered as page images in the printing system's memory. The
remaining job copies are printed from the stored data. This avoids the extra
processing involved in sending every copy from the computer to the printing
system.
With
Collate selected, the driver prints the complete job set by set. With Collate
cleared, it prints each page by set. For example, with
Collate selected, three
copies of a five-page document outputs as pages one through five in
succession, three times.
Duplex Printing
Duplex printing is printing on both sides of each page. Select
Print on both
sides to start duplex printing. If it is not selected, then the printer prints on only
one side of each page. The printer system contains a duplex unit that turns the
paper over to allow printing on the reverse side.
Print on both sides must be
selected to print on both sides of the cover and insert pages.
Flip on long edge
KX DRIVER 3-2
Turn the long edge of the page to view the content, like the pages of a book
bound at the side.