Konica Minolta CF5001 - Manual (Page 97)

BY-PASS FEED CF5001 Ver.1.0 Sep. 2003
2-44
II UNIT EXPLANA
TION
9.2 Operation
9.2.1 Tray up drive control
When Pick-up solenoid/BP (SD5) turns on after the paper feed motor (M41) turns on, the up/down plate is
raised with paper going up.
When pulling out ADU, coupling comes off the drive section and the up/down plate comes down by its own
weight.
9.2.2 Paper feed control
9.2.3 Paper size detection control
The paper size in the by-pass tray is detected along the length by the paper size/SBP (PS48) and the
paper size/LBP (PS49), and along the width by the paper size VR/BP (VR4).
[1] START button (ON)
[1]
8050ma2021
Paper feed motor (M41)
Pick-up solenoid/BP (SD5)
Paper feed clutch/BP (MC6)
By-pass conveyance sensor (PS26)