Konica Minolta CF5001 - Manual (Page 26)

CF5001 Ver.1.0 Sep. 2003 PRODUCT SPECIFICATIONS
1-3
I OUTLINE
First copy time: Full color: Less than 7.6 sec.
(platen mode, life size, manual density,
paper feed tray /1 to /3, plain paper, without gloss,
face up paper exit, A4 or 8.5 x 11)
Monochrome: Less than 7.6 sec. (platen mode, life size, manual density,
paper feed tray /1 to /3, plain paper, without gloss,
face up paper exit, A4 or 8.5 x 11)
Black-and-white: Less than 6.0 sec. (platen mode, life size, manual density,
paper feed tray /1 to /3, plain paper, without gloss,
face up paper exit, A4 or 8.5 x 11)
Continuous copy speed: Full color: 51 sheets/min. (A4, memory copy)
50 sheets/min. (8.5 x 11, memory copy)
Monochrome: 51 sheets/min. (A4, memory copy)
50 sheets/min. (8.5 x 11, memory copy)
Black-and-white: 51 sheets/min. (A4, memory copy)
50 sheets/min. (8.5 x 11, memory copy)
Continuous copy count: 9999 sheets, max. or 9999 copies
Paper exit tray loading capacity: 150 sheets (A4), max.
Copy density selection: AE, manual (9 steps)
Resolution: Scan: 600 dpi x 600 dpi
Copy: 600 dpi x 600 dpi
E-RDH memory *2 Standard: 128 MB for each color (Y, M, C, K);
Max.: 384 MB for each color (Y, M, C, K)
Interface: Serial port (USB Type B), Serial port (RS-232C), RJ45 Ethernet connector,
parallel port (based on IEEE 1284), Video interface for Fiery Controller.
No. of originals in memory: Full color: Priority in high resolution: 18 faces or more
Priority in smooth tone: 18 faces or more
Priority in high compression: 38 faces or more
Conditions
Original: KC #101/A3 (color)
Density: Manual 5
Mode: Character/picture, printed original, life size
Memory capacity: Standard 128 MB only loaded
Black-and-white/monochrome:
Priority in high resolution: 101 faces or more
Priority in smooth tone: 101 faces or more
Priority in high compression: 318 faces or more
Conditions:
Original: Image electronic institute FAX #4 chart/A4
Density: Manual 5
Mode: Character/picture, printed original, life size
Memory capacity: Standard 128 MB only loaded
Job: Job in the mode in which job memory is not used.
*2: Standard 128MB memory is packaged on the board. So, it cannot be changed for a new one.
Four slots are provided for expansion, and it is possible to install option memory.
(set of 4 by 256MB)