Kenwood XD-351 - Manual (Page 16)

16
XD SERIES (En)
Operation
Playback of CDs
Sequential playback
from the first track
1 Open the tray.
2 Place a disc.
3 Close the tray.
The tray opens when the key is pressed
and closes when the key is pressed again.
1. Load a disc.
0
2 1
The label must be on top.
Disc number
2. Start playback.
6
kHz
MHz
PRESET
AUTO PAUSE ALL DISC RANDOM
MEMORY STOP
REPEAT 1 PRESET EQ AUTO
MEMORY
DISC P.B.C
FLAT
AUTO
ROCK
PAL
POP
NTSC
JAZZ
STEREO TIMER SLEEP EX.BASS PROGRAM
L R
The selected disc
is indicated.
Lights when a disc is inserted at
the time of playback.
Track number
Playback
elapsed time
To pause playback
6
÷ Each press pauses and plays the CD alternately.
To stop playback
7
÷ Do not touch the played side of disc.
÷ Set the disc correctly according to the tray groove.
(Diagonal setting of a disc can cause trouble.)
Caution for Disc Handling
Do not use a disc with exposed adhesive from attached
cellophane or a rental CD seal, or from which such a seal etc.
has been removed. When such a disc is played, removal may
become impossible, and trouble can be caused.
CAUTION
Do not look into the laser light.
Laser light getting into your eyes can impair your vision.
If a disc has already been loaded in the CD player and the
power is OFF, simply pressing the CD play key turns power
automatically ON and starts playback.
0 7 6 ¢ 4
¶ 3 1 ¡ 7 / 0 8 3 1 ¡ 7 / 0 8
CD/TUNER
1 1 2
2