Kenwood XD-351 - Manual (Page 12)

12
XD SERIES (En)
Preparation
Operation of remote control unit
The keys on the remote control unit with the same names as on the main
unit have the same function as the keys on the main unit.
1POWER ( ) key $
Power ON/OFF switching is ex-
ecuted.
2OPEN/CLOSE (0) key ^
The disc tray is opened and closed.
3DISPLAY (DEMO) key
4%
4CD program-related keys
*(
CLEAR key/CHECK key/Program
mode (P.MODE) key
5RANDOM key &
Used for CD random playback.
6REPEAT key &
Used for CD repeat playback.
7BAND key )
8INPUT key $
9MUTE key %
Used for temporary muting.
0SLEEP/CLOCK LIGHT key
When the power is ON :
key for setting the sleep timer
§
When the power is OFF :
The display light lights %
!EQ key %
Switching between FLAT/JAZZ/
POP/ROCK
EX.BASS key
%
@DISC SKIP key &
#TUNING (1, ¡) keys
&)
Used for reception frequency tun-
ing and as CD skip and search keys.
$P.CALL (4, ¢) keys
*)
Used to call preset broadcasting
stations and as CD skip keys.
%(CD) Play/pause (6) key^
^(CD) Stop (7) key
^
&VOLUME key $
Loading batteries
2 Insert batteries. 3 Close the cover. 1 Remove the cover.
÷ Insert two R6 (“AA”-size) batteries
following the polarity indications.
2
1
Operation
Plug the power cord into the mains power outlet and press the
on/standby (
POWER) key of the remote control unit to
turn power ON. After the power has been turned ON, press the
desired key.
To turn power off, press the on/standby (
POWER) key
again. The system enters the standby mode in which only the
time display is lit.
÷ When pressing more than one remote control keys successively,
press the keys securely by leaving an interval of 1 second or more
between keys.
30° 30°
6m
Operating range (approx.)
Remote sensor
1. The provided batteries are intended for use in operation checking, and their service life may be short.
2. When the remote controllable distance becomes short, replace both of the batteries with new ones.
3. If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote sensor, malfunction
may occur. In such a case, change the installation position to avoid malfunction.
Notes Notes
POWER
OPEN/CLOSE
EQ DISPLAY
CLEAR CHECK P.MODE
RANDOM
INPUT
MUTE
VOLUME
REPEAT DISC SKIP
SLEEP/
CLOCK LIGHT
EX.BASS
1 TUNING ¡
4 P.CALL ¢
7 BAND 6
CD/TUNER
1
2
3
4
5
6
7
8
9
0
!
@
#
$
%
^
&