Kenwood TM-455E - Manual (Page 43)

7 APRS NETWORKS
TM-D710A/E CONTENTS 33
7.3 Let’s Send Email
With TM-D710A/E and RC-D710 it is possible to transmit email by using the Message function.
7.3.1 Sending Email with TM-D710A/E and RC-D710
First, press [MSG] to show the Message List on the screen. Next, press [NEW] to create a
message on the screen. Enter “EMAIL” to TO: field using the Tuning Control on the panel or the
numeric keypad on the microphone.
Figure 7-2 Using Email Function
Next, enter the email address to which you wish to send email. Leave one space blank after the
address and begin entering the message text. See an example below.
Figure 7-3 Entering Email Address and Message
The message can be entered using the Tuning Control on the panel or the numeric keypad on
the microphone. When the message is completely entered, it will be transmitted in an APRS
message. Email is transmitted via the IGate and the APRS server is connected to the Internet.
Figure 7-4 Transmission Flow for Email
Note: You cannot send email from a personal computer to a mobile station.
Internet
APRS Server
TM-D710A/E
APRS software
Email software
From IGate to Server
Server to Internet
Digipeater
Digipeater
Digipeater
Email transmission
Email has been received!