Kenwood ADVANCED INTEGRATION A/V CONTROLLER KOS-V500 - Manual (Page 69)

English 69
If you have pressed the Reset button or if
you have disconnected the Receiver from
battery...
1 Enter the correct security code
You must enter the same security code as that
you have entered in Step 3.
2 Enter the security code
Now, you can use your Receiver.
Deactivating Security Code
To deactivate the Security Code function.
1 Display the Security Code Setup screen
Touch [Security] in the SETUP Menu (page 58).
2 Start to cancel a registration of the
Security Code
3 Enter a security Code
Input by four-digit number.
4 Register your security code
Now, your security code is cleared.