Kenwood ADVANCED INTEGRATION A/V CONTROLLER KOS-V500 - Manual (Page 55)

English 55
Setting up the Hands-Free Phone
The Hands-Free system can be set as follows.
Hands-Free Set Up screen
Hands Free SETUP
Select Remove
AUTO
Auto Response
8
Phone Voice
Front L
Beep
On Off
1 1
2 2
3
4 5 6
1 Sets an automatic response time after call
termination. ( "8")
"Off": This function can not use.
"0-99": Sets to calling ring time (second).
2 Sets a ringing tone output position.
( "Front R")
"Front L": Outputs the tone from the
front left-hand side speaker.
"Front R": Outputs the tone from the
front right-hand side speaker.
"Front All": Outputs the tone from the
both front speakers.
3 Sets the beep of the incoming call.
( "On")
"On": Beep is heard.
"Off": Beep is canceled.
4 Displays the Phone Select screen.
5 Displays the Phone Delete screen.
6 Returns to the Hands-Free Control screen.
⁄
• Either the time interval for automatic answer set on this
unit or the time interval set on the cell-phone, whichever
is shorter, takes effect.
• Select the speaker which is further from the microphone
in order to prevent howling or echoes.
Selecting a Hands-Free Phone
You can choose the Hands-Free phone from the
list.
1 Display the Hands-Free Set Up screen
2 Display the Phone Select list
Hands Free SETUP
Select Remove
AUTO
Auto Response
8
Phone Voice
Front L
Beep
On Off
Phone Select screen
1
2
1 Selects the cell-phone to be used as a
hands-free phone.
2 Returns to the Hands-Free Set Up screen.
3 Select a Hands-Free phone you wish to use