Kodak DX3215 - Manual (Page 77)

67
Chapter 10
File Naming Conventions After a Copy
Your camera maintains separate numbering sequences for the pictures in the
internal memory and for the pictures on the MMC/SD card. When you copy a
picture, it is renumbered sequentially in the new location.
For example, in the Before Copy list below, the two pictures in the internal
memory are copied to the MMC/SD card. After Copy, the copied pictures are
renumbered on the MMC/SD card as DCP_0004 and DCP_0005. Additionally,
if DCP_0005 is deleted, the next picture copied to the MMC/SD card is named
DCP_0006. In the internal memory, the original pictures and their numbers
are unchanged.
Regulatory Information
FCC Compliance and Advisory
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: 1) this device may not cause harmful interference,
and 2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
Before Copy After Copy
Internal Memory MMC/SD Card Internal Memory MMC/SD Card
DCP_0001.jpg
DCP_0002.jpg DCP_0001.jpg
DCP_0002.jpg
DCP_0003.jpg DCP_0001.jpg
DCP_0002.jpg DCP_0001.jpg
DCP_0002.jpg
DCP_0003.jpg
DCP_0004.jpg
DCP_0005.jpg