Kodak DX3215 - Manual (Page 76)

66
Chapter 10
Picture File Naming Conventions
The camera maintains separate and sequential numbering sequences for the
pictures in both the internal memory and on an MMC/SD card. Pictures are
named DCP_nnnn.JPG, and are numbered in the order in which they are
taken. The first picture is named DCP_0001.JPG; the highest number allowed
is DCP_9999.JPG.
File Naming Conventions on an MMC/SD Card
m
When an MMC/SD card contains a picture named DCP_9999.JPG in the
\DCIM\100K3215 folder, subsequent pictures appear in a new folder
(\DCIM\101K3215), beginning with picture DCP_0001.JPG.
m
Even if you transfer pictures to the computer or delete pictures from the
camera, the camera continues to use consecutive numbers for all
subsequent pictures. For example, if the last picture taken was
DCP_0007.JPG and you delete it, the next picture you take is named
DCP_0008.JPG.
m
When you insert a different MMC/SD card into your camera, the next
picture number is defined by incrementing the higher of the last picture
taken by the camera, or the highest existing picture number in the folder.
m
If you use the MMC/SD card in a camera other than the DX3215 camera,
and that camera manufacturer adheres to this file structure standard, the
\DCIM folder contains a folder named by that camera. For more
information, refer to the documentation that accompanied that camera.
File Naming Conventions in Internal Memory
m
When the internal memory contains a picture named DCP_9999.JPG in the
\DCIM\100K3215 folder, subsequent pictures appear in a new folder
(\DCIM\101K3215), beginning with picture DCP_0001.JPG.
m
When you format the internal memory, the numbering sequence restarts at
DCP_0001.JPG.