Checking the battery level – Kodak DX3215 User Manual
Page 15
5
Chapter 1
Checking the Battery Level
Check the battery power level before taking pictures. For guidelines on battery
usage, see
.
1
Turn the camera on.
2
Check the battery status symbol that appears on the LCD.
Full —batteries have adequate power.
Low —batteries need to be replaced or recharged soon.
Exhausted (blinking)
—batteries are too weak to power the
camera. Replace or recharge the batteries.
When the batteries are exhausted, the ready light blinks red for 5 seconds,
then the camera turns off.
IMPORTANT BATTERY INFORMATION
For acceptable battery life and dependable operation, do not use
alkaline batteries.
These activities can shorten battery life:
m
Using the LCD as the viewfinder (see
m
Reviewing your pictures on the LCD (see
)
m
Excessive use of the flash
NOTE: If you are using a KODAK EASYSHARE Camera Dock, keep your camera
docked there for constant Battery Pack charging. For details on using
the EASYSHARE Camera Dock, see
.