Konica Minolta bizhub C10P - Manual (Page 90)

Replacing Consumables 78
Replacing a Toner Cartridge
Note
Be careful not to spill toner while replacing a toner cartridge. If toner
spills, immediately wipe it off with a soft, dry cloth.
If TONER OUT ACTION on the QUALITY/TONER OUT ACTION menu
is set to STOP , the message REPLACE X TONER (where “ X ” represents the
color of the toner) appears when a toner cartridge becomes empty. Follow the
steps below to replace the toner cartridge.
"
If TONER OUT ACTION on the QUALITY/TONER OUT ACTION
menu is set to CONTINUE , the message X EMPTY appears.
1
Check the message window to see which color of toner is empty.
Perform the operation described below to automatically rotate the carou-
sel to move the toner cartridge for the specified color, so that it can be
replaced.
Press Key Until Display Reads
REPLACE X TONER
or
X EMPTY
MENU
PRINT MENU
If the hard disk drive is installed, the
PROOF/PRINT MENU appears.
× 2 (or × 3) MENU
QUALITY MENU
REPLACE TONER
BLACK
Press until appropriate
color ( X ) is displayed.
X