Konica Minolta bizhub C10P - Manual (Page 145)

Status, Error, and Service Messages 133
PAPER JAM
TRAY X
Media has misfed while being
pulled from the specified tray
(X). Locate and remove the mis-
feed.
PUT
“SIZE”
“TYPE”
IN TRAY 1
The paper size set from the
printer driver is different from
the size of paper loaded into
Tray 1.
This message appears when
PAPER MENU/INPUT
TRAY/TRAY 1 MODE is set
to CASSETTE .
When PAPER MENU/
INPUT TRAY/AUTO
CONTINUE is set to ON :
Printing continues with paper
of a different size, even if this
message appeared.
To print using paper of the
desired size, load paper of
the correct size, and then try
printing again.
When PAPER MENU/
INPUT TRAY/AUTO
CONTINUE is set to OFF :
Load paper of the correct
size.
In addition, press the Down
key to be able to print using
the loaded paper.
PUT
“SIZE”
“TYPE”
IN TRAY 2
The paper size set from the
printer driver is different from
the size of paper loaded into
Tray 2. This message appears
when
PAPER MENU/INPUT
TRAY/AUTO CONTINUE is
set to OFF .
Load paper of the correct
size.
In addition, press the Down
key to be able to print using
the loaded paper.
REPLACE
OPC DRUM
Waste toner bottle is full. Replace the drum cartridge.
REPLACE X
TONER
The X toner cartridge is empty.
This message appears when
the
QUALITY/TONER OUT
ACTION menu is set to
STOP .
Replace the toner cartridge.
X TONER
MISSING
The X toner cartridge is not
installed. Install a X toner cartridge.
This
message... means... do this...