Konica Minolta bizhub C10P - Manual (Page 52)

Configuration Menu Overview 40
SUBNET
MASK
Setting
0.0.0.0
Specify the subnet mask for the network.
Use the Up, Down, Left, and Right keys
to specify the value.
ENABLE
HTTP
Setting
YES /NO
Specify whether or not HTTP is used.
If YES is selected, the Web page pro-
vided to the printer by the built-in HTTP
server is enabled.
If NO is selected, the Web page cannot
be used.
ENABLE
AUTO
IP
Setting
YES /NO
Select whether or not the IP address is
automatically acquired when DHCP/
BOOTP and PING, ARP are not
functioning or when there is no response.
If NO is selected, the IP address is not
automatically acquired.
If YES is selected, the IP address is
automatically acquired.
IPX/SPX FRAME
TYPE
Settings
AUTO /802.2/802.3/
ETHER II/SNAP
Specify the protocol used with NetWare.
ETHER
TALK
NAME
Settings
bizhub C10P
Specify the name of the printer for finding
printers with Macintosh EtherTalk.
The printer name can contain a maxi-
mum of 16 characters.
NAME2
Settings
-
Specify the name of the printer for finding
printers with Macintosh EtherTalk.
The printer name can contain a maxi-
mum of 16 characters.