Konica Minolta bizhub C10P - Manual (Page 49)

Configuration Menu Overview 37
AIDC REQUEST
AIDC
Settings
NO /YES
If YES is selected, image adjustments are
performed.
MODE
Settings
ON /OFF
If ON is selected, the image adjustments are
applied.
If OFF is selected, image adjustments are not
applied.
DENSITY
CONTROL
BLACK
Settings
1/2/3/4/5
Adjust the density of the black toner to one of five
levels.
If 1 is selected, the density is at its lightest level. If 5
is selected, the density is at its darkest level.
CYAN
Settings
1/2/3/4/5
Adjust the density of the cyan toner to one of five
levels.
If 1 is selected, the density is at its lightest level. If 5
is selected, the density is at its darkest level.
MAGENTA
Settings
1/2/3/4/5
Adjust the density of the magenta toner to one of
five levels.
If 1 is selected, the density is at its lightest level. If 5
is selected, the density is at its darkest level.
YELLOW
Settings
1/2/3/4/5
Adjust the density of the yellow toner to one of five
levels.
If 1 is selected, the density is at its lightest level. If 5
is selected, the density is at its darkest level.