Konica Minolta bizhub C10P - Manual (Page 48)

Configuration Menu Overview 36
"
All factory default values are shown in bold.
REPLACE
TONER
BLACK
Settings
YES /NO
When YES is selected, the carousel rotates to the
black toner cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to
“Replacing a Toner Cartridge” on page 78.
CYAN
Settings
YES /NO
When YES is selected, the carousel rotates to the
cyan toner cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to
“Replacing a Toner Cartridge” on page 78.
MAGENTA
Settings
YES /NO
When YES is selected, the carousel rotates to the
magenta toner cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to
“Replacing a Toner Cartridge” on page 78.
YELLOW
Settings
YES /NO
When YES is selected, the carousel rotates to the
yellow toner cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to
“Replacing a Toner Cartridge” on page 78.
TONER
LOW
ACTION
Settings
YES / NO
When set to YES , Toner low indication will show up on the control
panel when one or more toner cartridges reach to the low
condition.
TONER
OUT
ACTION
Settings
STOP /CONTINUE
When set to CONTINUE , printing continues even if the toner
cartridge is empty.
When set to STOP , printing stops when the toner cartridge is
empty.