Kenwood NV-701 - Manual (Page 51)

Application section
51
The input level from an external component connected to the MD/DVD (NV-301) or VIDEO 1/VIDEO 2 (NV-
701) jacks, such as an MD/CD recorder, DVD player, VCR, or analog turntable can be adjusted as desired.
Adjust so that the volume of the input source sounds at an equivalent level to the CD .
Input level adjustment
1
Select the extrernal input.
2
Select “Audio Options”.
3
Select “Input level”.
4
Select the input.
(With the NV-301, the MD/DVD input is auto-
matically selected.)
5
Adjust.
6
Save the settings.
The following items can be selected by pressing the
MULTI CONTROL keys repeatedly.
“Exbass Mode” (NV-301 only)
“Listen Mode” (NV-701 only)
“Balance”
“Tone Control”
“Input level”
“SW level” (NV-701 only)
+“Input level” is scrolled in the display
+“Adjust level” is scrolled in the display
÷ Adjustment is possible in the range of –7 to 0.
Effective sound adjustment
The level is
increased The level is
decreased
+“Audio Options” is scrolled in the display
The following items can be selected by pressing the
MULTI CONTROL keys repeatedly.
“Recording Options”
“Tape Options”
“Audio Options”
“Clock Options”
“Surround Setup” (NV-701 only)
(NV-701 only) Press VIDEO/6 ch INPUT repeatedly to
switch between VIDEO 1 and VIDEO 2 input.
(NV-701) (NV-301)
(NV-701 only) The following items can be selected
by pressing the MULTI CONTROL keys repeatedly.
“Video1”
“Video2”
VIDEO/6ch IN
MENU
DEMO
MULTI CONTROL
SET
MULTI CONTROL
SET
MULTI CONTROL
SET
MULTI CONTROL
A u d i o O p t i o n
I n p u t l e v e l
A d j u s t l e v e l
L e v e l - 7 d B
MD/DVD
ENTER
SET
+“Press “ENTER” to save” is scrolled in the display
P r e s s " E N T E R