Let's record, Recording onto a tape, Set the recording condition – Kenwood NV-701 User Manual

Page 34

Basic section

1. Load a cassette tape.

2. Select the tape transport direction.

Let's record

Recording onto a tape

1 Open the cassette holder.

2 Insert a tape top end first with the

side you want to record on the top.

3 Close the holder.

1 Select the TAPE input by press-

ing the TAPE key.

2 Press the TAPE key so that the

desired direction indicator ap-
pears.

•

3 Stop playback by pressing the

7 (stop) key.

To reverse the transport direction

÷ When recording is started, the

tape is transported in the direction
selected in this step.

÷ Wind the tape to the position

where recording is to be started.

3. Set the recording condition.

Select the reverse mode.

Note that this cassette deck cannot record onto
Metal tapes.

Note

÷ Differentiation between normal (TYPE )

and high (TYPE ) tape is set automatically.

÷ Remove tape slack before loading.

TAPE

DEMO

MENU