Kenwood NV-701 - Manual (Page 46)

46
Application section
Recording preparations are required. › (Steps 1 to 3)
During CD playback, any track can be selected
immediately for recording.
1
Play a CD.
2
Select “Recording Options”.
3
Select “CD One Track Recording”.
4
Start recording.
To end recording in the middle
Recording only the desired track
(CD ONE TRACK RECORDING)
Convenient CD recording
÷ Select a mode other than random play.
÷ Playback restarts from the beginning of the track being
played and recording starts at the same time.
+“CD One Track Recording” is scrolled in the display
The following items can be selected by pressing the
MULTI CONTROL keys repeatedly.
“CD One Track Recording”
(Only during CD playback)
“Timer Recording”
“Digital Rec Mode” (NV-701 only)
÷ Both the cassette deck and CD player stop.
+“Press “ENTER” to start” is scrolled in the display
+“Recording Options” is scrolled in the display
The following items can be selected by pressing the
MULTI CONTROL keys repeatedly.
“Recording Options”
“Tape Options”
“Audio Options”
“Clock Options”
“Surround Setup” (NV-701 only)
When recording has been completed, a non-recorded
portion of 4 seconds will be produced and the cassette
deck part will stop. The CD playback will be paused.
To record a different track, repeat steps 1 through 4.
MENU
DEMO
SET
MULTI CONTROL
R e c o r d i n g O p
C D O n e T r a c k
P r e s s " E N T E R
When effects are applied to the sound, the
effect applied to the sound can be re-
corded.
R
CD
ENTER
SET
MULTI CONTROL