Kenwood NV-701 - Manual (Page 47)

Application section
47
Recording preparations are required. › (Steps 1 to 4)
1
Select “Recording Options”.
2
Select “CD Direct Recording”.
3
Select the disc.
4
Start recording.
Recording an entire CD
(CD DIRECT RECORDING)
Perform the following operation while the CD
player is in play or stop mode to start recording at
the same time as the start of playback.
When effects are applied to the sound, the
effect applied to the sound can be re-
corded.
R
Convenient CD recording
÷ Recording of CD starts at the same time as playback.
÷ At the end of tape, the music is not recorded on the
leader tape portion. If you do not want the recording
to be interrupted in the middle, refer to “Recording
onto a tape” and start recording on side B.
›
To end recording in the middle
÷ Both the cassette deck and CD player stop.
+“CD Direct Recording” is scrolled in the display
+“Select Disc No.” is scrolled in the display
+“Press “ENTER” to start” is scrolled in the display
The following items can be selected by pressing the
MULTI CONTROL keys repeatedly.
“CD Direct Recording”
“CD Program Recording”
“Timer Recording”
“Digital Rec Mode” (NV-701 only)
The following items can be selected by pressing the
MULTI CONTROL keys repeatedly.
“CD Program Play”
“Recording Options”
“Tape Options”
“Audio Options”
“Clock Options”
“Surround Setup” (NV-701 only)
+“Recording Options” is scrolled in the display
MENU
DEMO
SET
MULTI CONTROL
SET
MULTI CONTROL
MULTI CONTROL
ENTER
R e c o r d i n g O p
C D D i r e c t R e
S e l e c t D i s c
D i s c N o . 1
P r e s s " E N T E R
SET