KTI Networks KS-2260 - Manual (Page 95)

-95-
4.1 Configuring SNMP Settings via Console Operation
Before performing SNMP operation, proper SNMP settings must be con-
figured. The SNMP related settings are:
Name : Logic name to identify the switch unit
Location : Location where the switch unit is installed
Contact : Contact person regarding the switch unit
Community string : SNMP communities to which the SNMP manager
belongs and access right to the switch unit ( read only or read/write)
Trap Managers : IP addresses of trap managers to which a trap is
issued and the community to which the trap manager belongs.
Up to four SNMP communities and up to three trap managers are sup-
ported by the system SNMP agent.
4.2 SNMP MIB-2 and Private MIB
Use the SNMP management application software to compile the MIB file
first before performing any management operation. The following MIB stan-
dards are supported:
RFC1213 MIB-2
RFC1493 Bridge MIB
RFC1643 Ethernet-like MIB
RFC1271 RMON MIB statistics, history, alarm, event group
Private MIB (Device Specific)