KTI Networks KS-2260 - Manual (Page 52)

-52-
3.3.3.2 Create a VLAN Group
Create a Port-based VLAN group
----------------------------------------------------
Add a VLAN Group
VLAN Name: [Vlan2 ] Grp ID:[2 ](1~4094)
Port Member
-----------------------
PORT1
Member
PORT2 Member
PORT3 No
PORT4 No
PORT5 No
PORT6 No
PORT7 No
PORT8 No
action->
------------------------------------------------------------------
Tab=Next Item BackSpace=Previous Item Quit=Previous Menu Enter= Select Item
-------------------------------------------------------------------------
New Port-based VLAN group settings:
VLAN name : Give a name to this new VLAN
Grp ID : Give an ID number to this new VLAN (Valid values 1-4094)
Member : The port specified is the member to this new VLAN.
Note:
If trunk groups exist, they are also listed after PORT26 and labeled TRK1,
TRK2 .. and etc.. They also can be configured as VLAN member.