KTI Networks KS-2260 - Manual (Page 82)

-82-
3.4.6.1 Enable 802.1X Protocol
----------------------------------------------------
Managed 24+2G Switch : 802.1x Enabled/Disabled Configuration
802.1x : Enabled
action->
----------------------------------------------------
This menu is used to enable 802.1X function of the switch.
3.4.6.2 802.1X System Configuration
----------------------------------------------------
Managed 24+2G Switch : 802.1x System Configuration
Radius Server IP: xxx.xxx.xxx.xxx
Shared Key : 12345678
MAS, Identifier : NAS_L2_SWITCH
Server Port : 1812
Accounting Port : 1813
action->
----------------------------------------------------
This menu is used to setup Radius server related parameters as follows:
Radius Server IP : IP address of the Radius server
Shared Key : an encryption key for use during authentication sessions
with the specified Radius server. It must match the key used on the
Radius server.
NAS Identifier : identifier for this Radius client (this switch)
Server Port : the UDP destination port for authentication requests to the
specified Radius server
Accounting Port : the UDP destination port for accounting requests to
the specified Radius server