KTI Networks KS-2260 - Manual (Page 79)

-79-
3.4.5 LACP
This menu list is used to configure LACP trunk groups.
----------------------------------------------------
Managed 24+2G Switch : LACP Configuration
Working Ports Setting
State Activity
LACP Status
Previous Menu
----------------------------------------------------
3.4.5.1 Working Port Setting
----------------------------------------------------
Managed 24+2G Switch : LACP Group Configuration
Group LACP LACP Work Port Num
---------------------------------------------
TRK1 Disabled 4
action->
----------------------------------------------------
Group : Display the trunk group ID.
LACP : Display the trunk group LACP setting.
Setting:
LACP Work Port Num : Specify the maximal number of ports can be
aggregated at the same time. A trunk group with LACP disabled must be
specified with 4. An LACP enabled trunk group can be specified up to 2.