Kodak 6J7611A - Manual (Page 20)

3-4 A-61500 May 2010
Maximum Document Size: 30.5 x 86 cm (12 x 34 in.). Documents
larger than 43 cm (17 in.) require operator assistance.
NOTE: The maximum document size for the i700 Series Scanners is
40 inches (1016 mm).
Paper inks: All inks on the paper must be dry before scanning is
started. This includes: Standard offset printing, Inkjet printer, Thermal
transfer, Handwriting inks.
Correction Fluids: Liquid Paper®, Tipp-Ex®, Wite-out®, and other
similar correction fluids.
Feeder Capacity: The elevator tray can hold up to 500 sheets of
75 g/m
2
(20 lb.) paper.
Adjusting the side
guides and end stop To accommodate multiple applications with variable feeding
requirements, the side guides can be adjusted for right-, left- or center-
edge feeding. The side guides can be moved together or independently
to achieve offset feeding.
1. Pull the side guides all the way out and then push them together
(toward the center) to reset or center them.
2. Open the side guides slightly wider than the documents you will be
feeding.
3. Adjust the output tray end stop to slightly longer than the longest
document being fed in a batch.
4. Place the documents in the elevator tray.
5. Adjust the side guides to fit the documents.
End stop
Side guides