Kodak DCS Pro SLR/n - Manual (Page 88)

5-24 April 29, 2004
Configuring your Camera
ISO
ISO determines the sensitivity of the camera system to light. Increasing or
decreasing the ISO increases or decreases sensitivity.
You can change ISO settings in 1/3 stop increments using the
Main-Command dial.
You can set ISO using the Image LCD (see below) or using camera controls
(see
page 5-24 ).
Setting ISO using the
Image LCD
1. Choose ISO from the Capture menu, then choose the desired setting.
2. Press the OK button.
Shortcut:
• You can also access this function using the Digital Status LCD shortcut
(see page 2-16 ).
Setting ISO using Camera
Controls
1. Set the Exposure Mode dial to ISO.
2. Rotate the Main-Command dial to choose the desired setting.