Kodak DCS Pro SLR/n - Manual (Page 81)

Configuring your Camera
April 29, 2004 5-17
Time and Date
A time and date stamp is associated with each image file.
Inside your camera, a CR 2032 Coin Cell battery (see
page 3-6 ) maintains
the time and date for one to two years. If this battery loses its charge, you
must reset the time and date.
1. Choose Time/Date from the Tools menu, then choose Time or Date.
2. If you chose Time, press the right or left side of the Four-way switch to
select hours, minutes, or seconds. Press the top or bottom of the
Four-way switch to change the value.
If you chose Date, press the right or left side of the Four-way switch to
select year, month, or day. Press the top or bottom of the Four-way
switch to change the value.
3. Press the OK button.