Kodak DCS Pro SLR/n - Manual (Page 52)

4-2 April 29, 2004
The Basics
Setting the User Mode
Setting Advanced Mode
1. If the Image LCD is off, press the Menu button to turn it on.
If the Image LCD is on and images are displayed, press the Menu
button.
NOTE: If an untabbed screen appears, the camera is in Basic mode.
2. Choose User Mode from the Basic menu, then highlight Advanced.
3. Press the OK button.
Setting Basic Mode 1. If the Image LCD is off, press the Menu button to turn it on.
If the Image LCD is on and images are displayed, press the Menu
button.
NOTE: If a tabbed menu appears, the camera is in Advanced mode.
2. Press and hold the Menu button, and press the right side of the
Four-way switch to highlight the Tools tab.
3. Press the top or bottom of the Four-way switch to highlight User
Mode, then highlight Basic.
4. Press the OK button.