KORG EMX-1 - Manual (Page 12)

12
5. SYNTH FILTER
These parameters modify the tonal character of the
synth part.
: supports motion sequence.
CUTOFF : Adjusts the cutoff frequency of the fil-
ter.
EG INT (EG intensity) : Adjusts the depth of the
filter envelope.
Part select section
1 2 3 4
3. KEYBOARD key
When this key is on (lit), you can use the sixteen
step keys as a keyboard to play a synth part
(☞p.22: Keyboard function). This key will alter-
nate on/off each time it is pressed.
4. [ ][ ] (select keys)
These keys are used to control the current posi-
tion in the lower row (red) of select LEDs. These
LEDs indicate different information - pattern set
group, keyboard octave, step key position - in con-
junction with other keys. (☞p.13: Select LEDs)
In Song mode, you can use these keys as fast-for-
ward / rewind keys.
RESONANCE : Adjusts the resonance of the fil-
ter.
DRIVE : Adjusts the amount of distortion being
introduced by overdriving the filter.
TYPE (filter type) : Selects the type of filter.
These parameters have no effect on drum parts.
1. (DRUM PART) 1...5, 6A-6B, 7A-7B (drum part keys)
These keys select drum parts. By pressing these
keys you can hear the sound that is assigned to
each part.
2. (DRUM PART) ACCENT (drum accent part key)
This key selects the drum accent part.
Step key section
1 2 3 4 5
6
3. (SYNTH PART) 1...5 (synth part keys)
These keys select synth parts.
4. (SYNTH PART) ACCENT (synth accent part key)
This key selects the synth accent part.
1. SHIFT key
This key is used in conjunction with other keys.
Hold down this key and press another key to ac-
cess the secondary function of that key.
SHIFT+RESET key: Erase data from a pattern.
SHIFT+step key: Execute the function printed be-
low the step key.
SHIFT+dial: Make larger or finer changes in the value.
(This will depend on the selected part.)
SHIFT+PATTERN key: Compare patterns.
For details on using the shift key with other keys,
refer to the explanation of each parameter.
2. PATTERN SET key
By holding down this key and pressing the STEP
key, you can switch to the pattern that was regis-
tered for that step key (☞p.60: Pattern Set).