Kenwood XD-A900 - Manual (Page 59)

XD-951/A900/A700 (En)
59
Preparation section
Basic
section
Application section
Knowledge sections
1Select the mode.
3Select the broadcast station (only when
TUNER is selected above).
Select “TIMER REC”.
Enter it.
Select the recorded input
source.
2Select the input source.
TUNER (Radio)
AUX (External input)
RETURN
Select the preset station No.
Enter it.
÷If you selected TUNER, press the SET key.
MULTI
CONTROL
SET
ENTER
MULTI
CONTROL
Enter it. ENTER
MULTI
CONTROL
Make the desired reservation.
Enter the OFF time.
÷ After entering the figure of “hour” with the procedure in 1 and 2,
enter the figure of “minute” using the same procedure.
6
7
1Select the mode.
3Select the broadcast station (only when TUNER is selected above).
Select “TIMER PLAY” or “AI PLAY”.
For timer playback or AI timer playback For timer recording
Timer operation
Adjust the clock before setting the timer.
1
The time is
advanced. The time is
returned.
2
Enter it.
Select the source to be played.
2Select the input source.
TUNER (Radio)
CD
TAPE
AUX (External input)
RETURN
Select the preset station No.
Enter it.
÷ If you selected TUNER, press the SET key.
Continued on next page...
Select “PROG. ON/OFF” and press the SET key.
9
SLEEP
TIME SET
O.T.T.
PROG. ON/OFF
PROG.1
PROG.2
AUTO POWER SAVE
Press the TIMER key.
8
MULTI
CONTROL
SET
TIMER
MULTI
CONTROL
SET
ENTER
MULTI
CONTROL
R PL A Y E M I T
PROG. 1
M 8 9 O 0 F 5 1
Enter it. ENTER
MULTI
CONTROL
TIMER PLAY Timer play
TIMER REC
AI PLAY
Timer play with gradually in-
creasing volume
RETURN
TIMER PLAY
TIMER REC
AI PLAY
RETURN
R E N U T
ON / O G O R P
MULTI
CONTROL
SET
PROG. 1
A M8 O 0
| Scrolled display (PROG. ON/OFF)