Kenwood XD-A900 - Manual (Page 32)

XD-951/A900/A700 (En)
32
Preparation section
Application section
Knowledge sections
Playback of CD
Select the “CD” input.
1
Check that the CD player is in the stop mode.
2
3
÷ Even if you program a disc or track which does not exit in the tray, it is
deleted automatically in playback.
÷ If you select “RETURN” and press the ENTER key, you can return to
the previous step and re-perform the operation.
÷ Up to 32 tracks can be programmed. When “FULL” is displayed, no
more tracks can be programmed.
Listening in the desired sequence
(program playback)
Any titles on the discs in the tray can be listened to in the
desired sequence. (Max. 32 titles)
Press the CD PGM key.
Enter track Nos. in the order you want to play them.
1Select the disc.
To select other tracks, repeat steps 1
and 2 for each of the additional tracks.
2Select the track.
3Enter it.
If it is in play mode
CD PGM
1. Select. 2. Press SET.
MULTI
CONTROL
SET
1. Select. 2. Press SET.
MULTI
CONTROL
SET
ENTER
÷ Press the CD PGM key during to program the track being played.
R E T N E
TN O O 1 1 0 P
CT A T R A E L E s
7
| Scrolled display (SELECT DISC)
| Scrolled display (SELECT TRACK)
DI s C 1 1 0 P
CT D I s E L E s