Kenwood XD-A900 - Manual (Page 46)

XD-951/A900/A700 (En)
46
Preparation section
Application section
Knowledge sections
GM R E C P D C
Recording preparations are required. • • • • •
(Steps 1 to 3)
Program the desired tracks from up to 3 CD discs in the
desired order and record the programmed playback onto
tape.
Recording the programmed titles
(CD PGM RECORD)
When the equalizer or SRS 3D is applied to the
sound, the sound with the applied effect can be re-
corded.
i
Convenient CD recording
Press the DUBBING key.
1
Start recording.
4
Select “CD PGM RECORD”.
Program the desired tracks.
3
2
ENTER
To end recording in the middle
7
DUBBING
1 Select.
MULTI
CONTROL
SET
Press the ENTER Key.
2 Press SET.
1Select tracks in the order you want
to play them.
(Perform step 3 on page 32.)
2Check, replace, add or delete the
programmed tracks as required.
(Perform step 4 on page 33.)
| Scrolled display (CD PGM RECORD)
CD ONE TRACK RECORD (Only during CD playback)
CD RECORD
CD EDIT
CD PGM RECORD
TAPE DUBBING
(Only when the selected input is TAPE and tapes are
present in both decks A and B)
When Dolby Pro Logic, Dolby 3 Stereo or DSP mode is selected,
cancel it by pressing the STEREO key of the remote control unit.