Konica Minolta Konica Print Utility KP - Manual (Page 15)

Configuring K KP
Sample Configuration
Since KP is fully customizable, the exact configuration will differ based upon which Konica printer
you are using. The following are detailed, step-by-step instructions on how to configure a Konica
7065 Workgroup Document System for use with KP. The Konica 7065 has many popular
features that are available on other Konica printers. The fundamental processes for configuring
these features within KP is the same for all Konica printers.
IMPORTANT: This sample is intended solely as a guide, from which you may learn the
basis for configuration.
The configuration in this sample is based upon a Konica 7065 Workgroup Document
System with an FS-106 Finisher, an LT-352 large capacity tray, 32 MB ERDH and an IP-303
Print Controller with 64 MB of RAM.
IMPORTANT: At any point during your use of KP or kpconfig, you may
type Ctrl-C to cancel the settings you have made and return to the shell
prompt. If you feel you have entered an incorrect selection, type Ctrl-C to
exit.
IMPORTANT: kpconfig will prompt you only for the options available for the printer that
you specify during installation.
Konica Print Utility 12
!
!
!