KORG SP-500 - Manual (Page 66)

66
3. Using the pedals
Damper pedal settings for Layer
and Split
You can specify whether the damper pedal effect
will apply to one or both sounds when you use the
Layer or Split functions.
1 Press the [FUNCTION] switch
2 Access the “Func 3/10” page
Press the [PAGE ®] switch twice to
access the “Func 3/10” page.
3 Make the desired settings
If you select off the “Upp1” check box,
the damper will not apply to Upper 1.
If you select off the “Low/Upp2” check
box, the damper will not apply to Upper
2 or Lower.
If you change rhythm styles, this will change
to the setting that is stored in the newly-
selected rhythm style. (☞p.46)
4 Return to the main page
Press the [EXIT] switch to return to the
main page.
Specifying the function of the
assignable switch
A variety of functions can be assigned to a pedal
connected to the Assignable Switch jack.
With the factory settings, this is set to “Soft.”
1 Press the [FUNCTION] switch
2 Access the “Func 3/10” page
Press the [PAGE ®] switch twice to
access the “Func 3/10” page.
3 Change the “Assignable Switch”
setting
Use the dial or the [VALUE] switches to
select the function that you want to con-
trol from the pedal connected to the
Assignable Switch jack.
Soft The soft pedal of a piano
Start/Stop [STRAT/STOP] or [PLAY/STOP]
Sync Start Same function as the [SYNCHRO START/
STOP] switches
Acc Reset Same function as the [ACC RESET]
switches
Intro/Ending1 Same function as the [INTRO/ENDING 1]
switches
Intro/Ending2 Same function as the [INTRO/ENDING 2]
switches
Fill1 Same function as the [FILL 1] switches
Fill2 Same function as the [FILL 2] switches
Variation 1 Select “1” for the “Variation” Cell
Variation 2 Select “2” for the “Variation” Cell
Variation 3 Select “3” for the “Variation” Cell
Variation 4 Select “4” for the “Variation” Cell
Bass Inversion Turn the “Bass Inv.” cell on/off
Scale Change Switch between “Main Scale” and “Sub
Scale” (
☞ p.65)
Variation Up Select next variation
Variation Down Select previous variation
Reverb On/Off [REVERB] switch, on/off
Effect On/Off [CHORUS etc.] switch, on/off
Drum Mute Mute Drum part of automatic accompani-
ment (
☞ p.40)
Perc. Mute Mute Perc. part of automatic accompani-
ment (
☞ p.40)
Bass Mute Mute Bass part of automatic accompani-
ment (
☞ p.40)
Acc1 Mute Mute Acc1 part of automatic accompani-
ment (
☞ p.40)
Acc2 Mute Mute Acc2 part of automatic accompani-
ment (
☞ p.40)
Acc3 Mute Mute Acc3 part of automatic accompani-
ment (
☞ p.40)
Tap Tempo Same function as the [TAP TEMPO]
switches
Ensemble Same function as the [ENSEMBLE]
switches
Quarter Tone Used in middle-eastern music. The pitch
will be adjusted by +50 cents for notes
played while the pedal is on (or adjusted by
–50 cents if the pedal is pressed twice).
Press the pedal once again to cancel.