Plate reverb, Hall reverb, Late – KORG SV-1 User Manual
Page 50: Everb
48 – The effects in detail | Reverb/Delay Effects section
P
LATE
R
EVERB
This models a type of reverb unit that works by vibrating a metal plate instead of
a spring. It is adjusted to a fairly short reverb time. This reverberation is charac-
terized by a rapid attack, and is suitable for percussive playing.
H
ALL
R
EVERB
This models the reverberation of a concert hall with numerous echoes.
Parameters
Values
Notes
Time
1…30
Sets the reverb time, which will differ depending on
the reverb type.
Lo Gain
-30…30
Adjusts the attenuation of the low-frequency range.
Hi Gain
-30…30
Adjusts the attenuation of the high-frequency range.
Pre Delay
0…200
Sets the initial delay before the reverberation begins.
By adjusting this setting you can clarify the definition
of the original sound.
Mix
0…100
Adjusts the mix amount of the reverb.
Parameters
Values
Notes
Time
1…30
Sets the reverb time, which will differ depending on
the reverb type.
Lo Gain
-30…30
Adjusts the attenuation of the low-frequency range.
Hi Gain
-30…30
Adjusts the attenuation of the high-frequency range.
Pre Delay
0…200
Sets the initial delay before the reverberation begins.
By adjusting this setting you can clarify the definition
of the original sound.
Mix
0…100
Adjusts the mix amount of the reverb.
SV1-100-EditorGuide-EFGI.book Page 48 Wednesday, June 3, 2009 12:35 PM