Reverb/delay effects section, Choosing a reverb/delay effect, Room reverb – KORG SV-1 User Manual
Page 49: Everb, Elay, Ffects
The effects in detail | Reverb/Delay Effects section – 47
English
R
EVERB
/D
ELAY
E
FFECTS
SECTION
Here you can adjust the settings of a reverb, echo or delay effect inserted after the
cabinet and modulation.
C
HOOSING
A
R
EVERB
/D
ELAY
EFFECT
Click the box of the REVERB/DELAY section, then on the name of the selected
Reverb/Delay effect, and finally choose a different item from the list.
R
OOM
R
EVERB
This models the reverberation of a typical room, with numerous early reflec-
tions.
Parameters
Values
Notes
Time
0…99
Sets the reverb time, which will differ depending on
the reverb type.
Lo Damp
0…100
Adjusts the attenuation of the low-frequency range.
Hi Damp
0…100
Adjusts the attenuation of the high-frequency range.
Pre Delay
0…70
Sets the initial delay before the reverberation begins.
By adjusting this setting you can clarify the definition
of the original sound.
Mix
0…100
Adjusts the mix amount of the reverb.
1
2
SV1-100-EditorGuide-EFGI.book Page 47 Wednesday, June 3, 2009 12:35 PM