Use only MIDI cables to transfer MIDI data. Connect these
cables between the MIDI connector of the D888 and the MIDI
connectors of the external MIDI device with which you want
to transfer data.

MIDI OUT connector

Transmits MIDI messages from the D888. Connect this to
the MIDI IN connector of the external device.

6-2. MIDI messages used by the D888

Since the

D888 will transmit MTC (MIDI Time Code), it can

operate in synchronization with an external sequencer or re-
corder.
The frame rate is 30 fps, and the MTC format is 30 NDF.

The D888 can operate as the master, but not as a slave.

About the MIDI implementation chart

The owner’s manual of each MIDI device includes a MIDI
implementation chart. This chart shows the types of MIDI
message that the device can transmit and receive. When us-
ing two MIDI devices together, compare their MIDI imple-
mentation charts to verify that the devices will be able to
communicate as you expect.

* A detailed explanation of the D888’s MIDI functionality can be

found in the separate MIDI implementation. Consult your local
Korg distributor for more information on MIDI Implementation.

6-3. MIDI synchronization settings

Here’s how to select whether you will synchronize an exter-
nal MIDI device to the

D888. If you’re not using synchroniza-

tion, choose the “OFF” setting to avoid malfunctions.

1) Press the MENU button to access the Menu screen.

2) Use the cursor up/down buttons to select “5. MIDI

Out”.
Alternatively, you can select “5. MIDI Out” by pressing
channel button “5”

instead of using the cursor up/down

buttons

3) Use the cursor left/right buttons to select “ON” or

“OFF”.
If you’ve changed the current setting, a “?” symbol is
shown.

4) To accept the change, press the ENTER/OK button to

confirm it.
If you decide not to change the setting, press the EXIT/
CANCEL button

to maintain the original setting.

7. Upgrading the system

7-1. Downloading the operating

system

The most recent operating system can be downloaded from
the Korg website (http://www.korg.com). For details on the
procedure, refer to the Korg website.

Preparations for updating the system

Use a USB cable to connect the

D888 to your computer (refer

to p.42 “5-1. USB mode”), and copy the downloaded system
file to the root directory (or folder) of the KORG

D888 hard

drive.

7-2. Updating the system

If the power is turned off accidentally while the system is be-
ing loaded, the

D888 may stop operating correctly. If this oc-

curs, please contact Korg customer service.

1) Press the MENU button to access the Menu screen.

2) Use the cursor up/down buttons to select “System

Load”.

3) Press the ENTER/OK button.

The screen will indicate “System Load: Are you sure?”

If you decide not to load the system, press the EXIT/
CANCEL button

to return to the Menu screen.

4) To execute the Load System operation, use the cursor

left/right buttons to select “Yes” for the “Execute” field,
and then press the ENTER/OK buttom once again.
The display will indicate “System Load: Working...”
and loading will begin.

5) When system load is complete, the display will indi-

cate “System will shut down. Press OK”.

6) Press the ENTER/OK button.

The

D888 will shut down and enter standby mode (the

STANDBY LED will light).

7) Press the ON button to turn on the power.

The

D888 will start up with the system you loaded.

If the update process fails, a message will appear. Take the ap-
propriate action for the message that appears (

→p.45 “Vari-

ous messages”).

Other