Konica Minolta DiMAGE_A2 - Manual (Page 88)

88 Recording menu
Wireless / Remote Flash
Wireless/Remote flash allows the camera to control an off-
camera Program/Maxxum 5600HS(D) or 3600HS(D) flash
unit without the need of a cable. Single or multiple flash
units can be placed around the subject to create different
lighting effects.
The camera’s built-in flash fires to control the off-camera
flash units rather than to illuminate the subject. See your
local camera dealer about Minolta lighting accessories.
On-camera
flash
Wireless/
Remote
flash
Set the camera to the wireless flash mode in section 1 of
the recording menu (p. 80). This will simultaneously set the
flash to the wireless mode and set the camera to the
flash’s wireless channel.
Slide the cap off the accessory shoe (p. 75).
Slide the Program/Maxxum 5600HS(D) or 3600HS(D) flash
on the accessory shoe until the safety lock engages.
Turn on the camera and flash unit.
Image size
Quality
Flash mode Fill-flash
Flash control Red eye
AEL button Rear sync.
Reset Wireless